Package Contents; Led Indicators - D-Link DXS-1210-28S Quick Installation Manual

Introduction
This Quick Installation Guide gives instructions for setting up the D-Link DXS-1210-28S switch. The
model you have purchased may appear slightly different from those shown in the illustrations. For more
detailed information about the switch, configuring the device, and technical specifications, please visit
website http://www.dlink.com/

Package Contents

Open the shipping carton of the Switch and carefully unpack its contents. Please consult the packing list
located to make sure all items are present and undamaged.
• One DXS-1210-28S Switch
• AC power cord(s)
• AC power cord retainer
• One RJ-45 console cable
• Four rubber feet with adhesive backing
• 2 Mounting Brackets
• Mounting kit
• One Quick Installation Guide
If any of the above items are damaged or missing, please contact your local reseller for replacement.
Hardware Overview
Front Panel Components
Port
Reset Button
Console Port
SFP+ Ports (1 to 24)
RJ45 Ports (25 to 28)

LED Indicators

LED Colour
Power Green
Console Green
Description
•
Press and hold for less than 5 seconds
This reboots the Switch. All unsaved configurations will be lost.
•
Press and hold for between 5 and 10 seconds
This resets the software configuration on the Switch to the factory default settings. All the
port LEDs will light up amber for 2 seconds to indicate the start of the factory reset stage.
The console port is used to connect to the CLI of the switch. The connection is out-of-band
and the console cable (included in the package) must be used for the connection.
This switch is equipped with 24 10GBase-X SFP+ ports, which support a wide collection of
SFP/WDM SFP/SFP+/WDM SFP+ transceivers.
This switch is equipped with 4 10GBase-T Ethernet ports.
Status
Solid
Blinking
Light Off
Solid
Description
Power on.
Performing system self-test.
Power off.
Console session is active (user logged in).
2