Warranty - M Pumps CN SEAL-MV Series User Manual

area would cause the risk of an explosion
ATEX
This symbol indicates explosive atmosphere zone marking according to ATEX 94/9/CE. It
is used in safety instructions where non-compliance would cause the risk of an explosion
in the hazardous area.
DANGER
Indicates a potential risk to operators who are using the pump and / or the integrity of the
pump, which could result in damaging itself and / or serious injury to people concerned.
CAUTION
PROHIBITION
Calls attention to transactions that are absolutely prohibited, not respecting the prohibition
you may damage the pump and / or operators.
M PUMPS PROCESS declines responsibility for damages to things or people for not
having complied with the prohibitions set
3.

WARRANTY

Valid for one year from the date of the pump sale. M PUMPS PROCESS do not assume any liability for any
warranties explicit or implied, nor as regards the possibility to sell or the suitability of the items supplied.
The warranty will not be applied if:
 the repair and / or maintenance was not carried out strictly in accordance with the instructions;
 the pump has not been installed and put into service as instructed, we strongly recommend to refer to
APPENDIX B of the present manual for startup;
 the repairs were not made by staff M PUMPS PROCESS or were made without consulting M PUMPS
PROCESS;
 spare parts are not original were used;
 lubricants were used different from those recommended;
 the parts supplied were not used according to their nature and / or destination;
 the parts supplied were used carelessly, negligently, improperly;
 the parts supplied were damaged due to external circumstances.
All wear parts are excluded from warranty.
Pag. 6/49
Calls attention to important details that the staff must know and keep in mind for the
proper use and operation of the pump.
Doc. ISM0076_MANUALE_CN SEAL-MV_ENG_REV04.DOCX