Table of Contents
Advertisement
DANGER
It is incorrect any use of the pump other than that mentioned in the paragraph
"Instructions for a proper use reasonably foreseeable".
M PUMPS PROCESS disclaims any liability damages to things and people related
to uses for which the pump was not specifically designed and constructed.
Also the ways in which certain situations of danger might present as a result of improper use, are
prohibited.
16.
RESIDUAL RISKS AND PROTECTION MEASURES TO BE TAKEN
Description of the residual risks that remain
16.1.
Despite adopted measures incorporated in the pump, the main dangers associated with the use of the
pump and the solutions identified are the followings:
Danger of sketches projection of process fluid that can be corrosive or burning, as a result of improper
installation and sudden ruptures of the pump casing and hydraulic lines;
Danger of cuts to the hands due to the presence of smears on the pump casing;
Explosion of the pump is due to a formation of explosive mixture inside the pump casing as a result of
an improper use.
Protection measures to be taken by the user and instructions
16.2.
PROHIBITION It is absolutely forbidden to the user to tamper with safety devices. Before
using the pump check the proper couplings mechanical protection. Any tampering
nullifies the warranty and liability of M PUMPS PROCESS towards the pump
users.
Only maintenance personnel can perform maintenance operation affecting safety devices.
Pag. 24/49
Try to clean the pump while it is running;
Run the pump in the opposite direction to that shown in the pump
casing;
Run the pump over nominal temperature and pressure;
Pumping liquids containing solid particles of any size, without
written consent of M PUMPS PROCESS or substances that can
attack chemically or erode the inside of the pump;
Remove guards and shelters while the pump is running;
Act on electrical parts installed without first removing the tension,
not to alter the safety devices installed, do not activate repeatedly
the command buttons.
Doc. ISM0076_MANUALE_CN SEAL-MV_ENG_REV04.DOCX
Advertisement
Table of Contents
