Personal Protective Equipment To Wear; Operational Limits, Description Of Hazards Not Excluded From The Security Measures Taken; Safety Information Present On The Pump - M Pumps CN SEAL-MV Series User Manual

Personal protective equipment to wear

16.3.
Protection measures that have to be taken during this phase are adopting antacid and antistatic coverall,
chemical-resistant glasses, gloves to protect from mechanical and chemical agents and safety shoes.
Avoid the use of accessories (necklaces, bracelets, etc.) and clothes unshackled; torn or dangling that
could get entangled in parts of the structure.
17. OPERATIONAL LIMITS, DESCRIPTION OF HAZARDS NOT EXCLUDED FROM THE SECURITY
MEASURES TAKEN
Dangers that have not been reduced/ eliminated with the security measures adopted on the pump can be
reduced/eliminated if operators apply measures on management as a result of having to:
 Keep all the safety warnings of and all plaques and labels intact and replace them when
necessary, periodically checking their good condition;
 Don't employ substances which may affect the physical ability or the mental faculty (alcoholic
beverages, medicines, drugs, etc);
 Don't use without permission spare parts not identical to the originals or components not
approved by M PUMPS PROCESS;
 Don't perform any modification or structural intervention without the approval of M PUMPS
PROCESS;
 After shocks accidentally suffered by the pump, check the pump integrity and perform a check to
M PUMPS PROCESS;
 After a long period of pump detention check the pump integrity and functionality of stakeholders
to wear. If necessary perform the replacement with identical spare parts to the originals.
CAUTION Each of the misuse or negligence listed here causes:
 immediate cancellation of M PUMPS PROCESS assistance.
 cancellation of M PUMPS PROCESS responsibility for damage to property,
animals or people.

Safety information present on the pump

17.1.
Safety warnings applied to the pump must be respected and restored in case of illegibility, and are as
follow:
Warning Description signs applied
Marking plate M PUMPS
1.
PROCESS.
Label "follow IOM
2.
instructions"
Label "Fill with oil prior to
3.
start"
Symbol/indication
As described in paragraph
"PLATE"
Doc. ISM0076_MANUALE_CN SEAL-MV_ENG_REV04.DOCX
Quantity Notes
1 1
1 /
1 /
Pag. 25/49