Appendix A - Register Of Maintenance And Periodic Checks Of The Pump - M Pumps CN SEAL-MV Series User Manual

27. APPENDIX A – Register of maintenance and periodic checks of the pump
It is provided a list of maintenances to be carried out and their respective ranges; you must register these
operations.
Commissioning date: ____________________
Main maintenance operations to be performed by the second year of use onwards:
Required check
N.
1 Check oil level at bearing frame
2 Internal bearings
3 Wear ring
4 motor bearings
DESCRIPTION OF OPERATION
DATE (report the numbers associated with intervention and any operations
carried out in addition)
Warnings and protective measures
be taken to perform maintenance
properly and safely
Top up the oil until the middle of
the eye plug
Check the condition of bushings,
sleeve bearings and thrust bearing
if worn replace them, reassemble
using new gaskets
Check the status of the wear ring,
see the table of tolerances
Unless other specifications, motor
bearings are greased for life, so
there is not a maintenance
schedule, anyway it is
recommended to check the
condition of the bearings and
replace them when worn
Doc. ISM0076_MANUALE_CN SEAL-MV_ENG_REV04.DOCX
Range
Weekly. Replace
the oil every 5000
hours.
After 2500 hours,
check any
premature wear,
then every 5,000
hours or every
year.
After 2500 hours,
check any
premature wear,
then every 5,000
hours or every
year.
OPERATOR
SIGNATURE
Pag. 45/49