Table of Contents
Advertisement
1.
GENERAL WARNINGS AND SAFETY
This manual was prepared by M PUMPS PROCESS pump to provide the buyer all necessary information for its
proper use and regular maintenance. In this manual is also contained the manual of the electric motor when the
pump is supplied with this.
For safety and hygiene of the workplace and to ensure a fair and sustainable use of the pump, the manual should
be kept for any consultation.
As part of the pump, this manual must go with it.
For any given non-deductible or not included in this manual is recommended that you contact M PUMPS
PROCESS.
Do not use the pump before you have read and understood all safety rules and instructions in this
manual.
In case of damage or loss of the manual, ask for a copy to M PUMPS PROCESS promptly.
The failure to follow instructions in this manual, exempt M PUMPS PROCESS from any liability.
The pump and the instructions are intended for operators who make professional use and should be used by
qualified personnel adequately trained, aware of uses, operation and risk that the pump generates during its use,
the user with experience is the best form of qualification.
M PUMPS PROCESS reserves at any time the right to make changes deemed necessary to improve the pump,
taking care to update this manual as soon as possible. This reflects the state of the art at the marketing pump. In
case of transfer of the pump, the user is encouraged to report to M PUMPS PROCESS the address of the new
owner to facilitate the transmission of any additions to the manual to the new user.
M PUMPS PROCESS reserves all rights to this manual, no total or partial reproduction is allowed without written
consent.
2.
SYMBOLS USED IN THE MANUAL
In the text to indicate the risk of maneuvers or possible dangerous situations, warnings have been included, each
of which consists of a symbol followed by a warning.
ELECTRICAL
SAFETY
This symbol indicates electrical safety instructions where non-compliance will involve a
high risk to personal safety or the loss of life.
LOSSES
HAZARD
This symbol indicates safety instructions to follows during pump installation and
commissioning where non-compliance will involve a high risk to personal safety or the
loss of life.
HANDS
This symbol is used in safety instructions to remind to don't remove protections when
HAZARD
pump is running. It is used in safety instructions where non-compliance in the hazardous
Doc. ISM0076_MANUALE_CN SEAL-MV_ENG_REV04.DOCX
Pag. 5/49
Advertisement
Table of Contents
