Union Community AC-5000RF User Manual page 49

AC-5000 User Guide
When the user selects [ENT~]
the following screen will appear.
▶ C ard Format
This is the menu that sets the manner of displaying the card number. As shown below,
the displayed card number varies depending on the configuration. Therefore, if
changing it during operation is unavoidable after it was set during initial installation, the
card should be registered again.
RFcard example) Card number (5byte): 08h 01h 16h 1Dh D6h
Card Format
1. Default
2.
Hexadecimal
number
3. Decimal
number
4. Decimal
number 35
SCcard example) Card Number (4byte): 52h 9Dh 06h E3h
Card Format
1. Default
2.
Hexadecimal
number
3. Decimal
number
4. Decimal
number 35
The user can exit to the parent menu using [ENT~] key to apply the changed value after
finishing the setting while using [F4(←)] key to cancel input during setting.
.
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong
Songpa-gu, Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
[5. Terminal]
I nitial setting: Identical with the screen at the left
▶
Read Card NO.
▶
When the user puts the card on this screen, the
card number will be displayed on the LCD.
Card Number Method of Expression
(3+5)
02207638
[022(16h)+07638(1DD6h)]
0801161DD6 10-digit hexadecimal number
Last 4byte to be expressed in a 10-digit decimal
0018226646
number (01161DD6h)
02207638 Same as '1. Default'
Card Number Method of Expression
529D06E3 Expressing in an 8-digit hexadecimal number
Expressing in an 8-digit hexadecimal number
E3069D52
changing the order of byte
Hexadecimal number 529D06E3 to be expressed in
1386022627
a 10-digit decimal number
Hexadecimal number E3069D52 to be expressed in
3808861522
a 10-digit decimal number
[5. Card Reader] in the initial screen
digit decimal
48
,
◆
number