Union Community AC-5000RF User Manual page 27

AC-5000 User Guide
As shown on the screen, the user can register by pressing [2] for fingerprint, [3] for card,
and [4] for password. Basically, it is registered in the name of the user. Using the keys [7]
and [8], the user can modify into the user and the admin. Once the registration is
completed, the user can press [ENT] to save it. The user must press [F4(←)] key to
cancel the registration and exit from the menu.
※ Only the user registered as admin can modify the operating environment of the
terminal, and Add/Modify/Delete the information of all the users saved in the terminal.
Therefore, special care is required for the registration of the admin.
3.3.1.1. Auth Type
3.3.1.2. FP Register
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong
Songpa-gu, Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
Delete the existing value by pressing [F4(←)] key,
enter one of the 12 authentication types shown on the
screen, and then press [ENT] key.
Place finger on the sensor referring to '1.8.
① ① ① ①
How to register and enter fingerprint'. Fingerprint
must be input two times as below in accordance with
the guidance on the screen.
When the fingerprint sensor is lit together with the
message 'Place Finger on sensor', place the finger on
the window for fingerprint input for 2~3 seconds until
the light is off.
② ② ② ② W hen the message 'Place same Finger on
sensor' appears, enter once again the fingerprint
input just before.
※ ※ ※ ※ A t the time of entering the fingerprint for the second
time, input it again after the user takes the finger off
the fingerprint input window.
26