Led Signal Shown During Operation; Keys Used During Operation - Union Community AC-5000RF User Manual

AC-5000 User Guide

1.4. LED signal shown during operation

●
Power Red
●
Door Green

1.5. Keys used during operation

[0]~[9]
- Keys used for numeric input
[F1]~[F3]
- Keys used for changing the authentication mode
- Used for changing the authentication mode
[F4]
- Used as Delete key for correction when inputting the figure
or [←] - Used for canceling input and moving to the parent menu in the menu
mode
- Means pressing [F4(←)] key for 2 seconds or longer
- When input focus is located in the input box, it can cancel the input
[F4(←)~]
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong
Songpa-gu, Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
- At the time of fingerprint card authentication, it shows the
status that the card reads fingerprint data. The user must
put the card for 1~2 seconds until the message
disappears.
- When waiting for the response after the user attempted
authentication to the server
- When upgrading the terminal program
(Be sure not to power off the terminal during the time the
message is output)
On: Normal
Flickering: When the lid is opened or there is any
communication error in the connection with LC010
On : Door Open
Off: Door Close
and exit to the parent menu by pressing this button for 2 seconds or
longer
11