Union Community AC-5000RF User Manual page 29

AC-5000 User Guide
3.3.1.5. FP Option
As it is the settings related with fingerprint, it is the option that can be changed after
registering the fingerprint in advance. If the user selects it with the fingerprint already
registered, it only results in the buzzer sound of failure.
3.3.1.6. Save
When registration process is finally completed, press [6] key to save it. In this case, the
user is not saved if the user doesn't press [6] key but exits by pressing [F4(←)] key..
The following is the LCD guidance message indicating that the user can exit from the
registration process.
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong
Songpa-gu, Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
Input the password in 1~8 digits on the password
input screen and press [ENT] key. The 'Confirm
Password' window will appear again. Input the same
password and press [ENT] key.
Press [F4(←)] key for 2 seconds or longer to cancel it
and exit.
▶ ' 1:1 Level' (Initial setting: '0')
It is the item that determines the authentication
level for each user registered. By modifying this
value, it is possible to determine the authentication
level by registered users.
When set to '0', it conducts authentication using 1:1
authentication level of the terminal.
E nable 1:N (Initial setting: 'v')
▶
When this option is checked, it is possible to
successfully authenticate
without any user ID or card.
28
using fingerprint