Add-On Applications And Utilities - Fujitsu Stylistic CE CT2000 Series User Manual

• Before attempting to synchronize the
tablet with the host computer, you must
power up the tablet before inserting it
into the tablet dock.
• Be sure to insert the tablet carefully in the
dock. Failure to align the interface
connectors could result in synchronization
problems.
First-Time ActiveSync
The first time you use ActiveSync, you must first set up a
partnership between your tablet and the host computer.
To do so, perform the following steps.
1. Be sure that you have downloaded ActiveSync from
the Microsoft web site, as detailed above.
2. Before attempting to synchronize the systems, be sure
to connect the USB cable that came with the cradle
between the host computer and the tablet, as
instructed in the cradle manual.
3. Turn on the tablet prior to inserting it in the tablet
dock, otherwise you will fail to synchronize.
4. A few seconds after you insert the tablet in the dock,
you will hear a beep, indicating that the tablet and
remote computer are communicating
If the tablet and the remote system fail to
synchronize, undock and redock the system;
the interface connector on the bottom of the
system may be misaligned with the
connector on the dock.
5. A message appears asking if you want to set up a
partnership. Click [Yes], then click [Next].
6. When asked for a device name, enter a name for the
tablet and click [Next]. In the event that the name
you enter has already been used, you will receive a
message stating "Device name not unique". If that
occurs, enter a new name and click [Next].
7. Select Synchronization Settings and click [Next].
8. When you receive a message stating that setup is
complete, click [Finish]. An ActiveSync window will
appear telling you that you are connected and
sychronized.
When ActiveSync is disconnected, the CE
Tablet may shut down. Before closing the
ActiveSync connection, be sure to save all
active data.
To Launch ActiveSync Automatically
On the tablet desktop go to Start -> Settings -> Control
Panel and click on the PC Connection icon. Verify that
the "Enable direct connections to the desktop computer"
checkbox is checked. If you do not want to sync automat-
ically, uncheck the box. In the future, ActiveSync will
start automatically when you install the running system
in the dock.

ADD-ON APPLICATIONS AND UTILITIES

In addition to the Windows applications listed above,
there are several third-party applications and utilities
included on your tablet. Details on their use can be found
in the appropriate sections of this manual.
Control Panel
The Control Panel provides several helpful utilities,
including:
Backlight: The Backlight utility lets you adjust the
■
backlight level using a slider bar.
.
Buttons: The Buttons applet allows you to assign
■
different applications to the four function buttons.
ClearType: This applet lets you enable ClearType
■
font.
Display: The Display applet allows you to change the
■
color or image in the background and to set the
amount of time for the backlight to stay on when the
system is not in use (this is for battery conservation).
Display DPI: Allows you change the resolution of the
■
display from 1024 x 768 to 800 x 600 pixels.
Input Panel: The Input Panel allows you to select the
■
size of the on-screen keyboard.
PC Connection: This applet allows you to select the
■
method for synchronizing with your desktop
computer. PC Connection also allows you to specify
whether the system will ActiveSync automatically at
startup.
Power: The Power utility displays information about
■
battery and device status, and allows you to change
the power schemes for battery power and AC power
to maximize your battery life.
Stylus: The Stylus applet allows you to change the
■
double-tap actions and to calibrate the pen.
System: The System applet provides information
■
about the system, device name, and copyright infor-
U s i n g Y o u r T a b l e t S o f t w a r e
Undocking and re-docking the tablet too
quickly will cause a loss of connection.
23