F u j i t s u C o m p u t e r Bump Case Installation Guide FPCCC51 I N S T R U C T I O N S These instructions provide details on using the FPCCC51 bump case.
Description There are three flaps on the bump case. When the case is held as shown in Figure 2, the flaps are on the left, right, and bottom. The left flap has a slot in it to allow access to the USB jack, audio jack, and Compact Flash slot.
Installation To install your tablet into the bump case, open the bottom flap and either one of the side flaps. The flaps are secured by Velcro® strips (see Figure 1). Slide the pen tablet into the case, with the display screen facing the open window (see Figure 2).
Pen holder When you have the tablet installed in the case, store the tablet pen in the pen holder (Figure 2) to simplify access to it when using the system. Shoulder strap To secure the shoulder strap, attach the strap clips to two of the D-rings.
For technical support call: 1-800-8Fujitsu (1-800-838-5487) or e-mail us at: email@example.com Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu, Ltd. Microsoft and Windows are registered trademarks of the Microsoft Corporation. All other trademarks mentioned herein are the property of their respective owners.