Controlling Mode - TECHCON SYSTEMS TS566R User Manual

5.1.3 Controlling Mode

The TS560R can be used as stand-alone controller or integrated to any
robot/automation system.
A. To use as stand-alone controller:
Go to setup screen to check for controlling mode. If the icon "C" is
showing, then it is already set as stand-alone controlling mode. If the
icon "R" is showing, press this icon to change to "C"
B. To use as integrated controller to robot/automation
Press icon "C" to change to "R"
Note: Users will experience inconsistent dispensing and intermittent
behaviors with their dispensing valves if attempting to run the TS550R
in controller mode when interfacing with the robot.
Stand alone controlling
mode
Robot mode (integrate
to robotic system)
9