Table of Contents
Advertisement
Proceed to make changes
Click OK button to save
The new parameters will be displayed on the controller
7.
SOFTWARE UPGRADE
Note: For future software upgrade, follow the instructions below.
1.
Download the latest software version from Techcon website and copy it to
a blank USB thumb drive. Note: Do not put the software file inside a
folder
2.
Make sure that the unit is turned off
3.
Insert the USB drive to the USB port located in the back of the unit
4.
Turn on the unit
5.
Wait while the system is loading the new software. This process can take
a few minutes
"Edit" icon
25
Advertisement
Table of Contents
