Table of Contents
Advertisement
6.
Wait until the system completes the software update from the USB drive
and the first touch-screen calibration is displayed
7.
Remove the USB drive from the USB port before proceeding to the next
step
8.
Follow the instructions on the display to calibrate the touch screen by
touching the crosshair at five different points. Note: In order to
accurately calibrate the touch screen, it's recommended that the stylus
pen is used
9.
Wait until the system completes the rebooting sequence and the home
screen is displayed
10. Repeat sections 5.1.1 and 5.1.2 to re-calibrate the air pressure
26
Advertisement
Table of Contents
Need help?
Do you have a question about the TS566R and is the answer not in the manual?
Questions and answers