Connectors And Peripheral Interfaces - Fujitsu Stylistic 3500 User Manual

Connectors and Peripheral Interfaces

Connectors and peripheral interfaces on the Stylistic 3500 pen tablet allow connection
of various devices. Specific locations are illustrated in Figure 1-1 and Figure 1-2.
Table 1-2 provides a description of each peripheral connector on the Stylistic 3500
pen tablet. Each of the illustrated icons is printed on the pen tablet case.
Connector/
Pen Tablet Icon
Peripheral
DC input
connector
†
Serial port
Floppy drive
port
USB (A) Port
PCMCIA
CardBus slot
Microphone
jack
Headphone
jack
†
Open the connector door to access these connectors.
Table 1-2 Peripheral Connectors/Interfaces
Connect an external power source such as the AC adapter
or auto adapter.
Connect an external serial device to your system.
The floppy disk drive connector uses a special interface
that can be mated only with a Fujitsu FMWFD2 floppy disk
drive. Do not attempt to connect any other type of unit to
this connector. Contact your reseller for more information.
Connect Universal Serial Bus-compliant devices to the pen
tablet. USB (B) port is located on the optional Stylistic 3500
mini-dock.
Install a Type II PC Card
Connect an external microphone. The internal microphone
is disabled when you plug in an external microphone.
Connect stereo headphones or powered external
speakers. The internal speaker is disabled when you plug
in external headphones or speakers.
Purpose
Connectors and Peripheral Interfaces
1
11