Calibrating The Stylus - Fujitsu Stylistic 3500 User Manual

To toggle between using the stylus for inking and using it as a mouse, click on the
small pen icon in the system tray at the bottom right of the screen.
Here are some hints on using the stylus similar to a two-button mouse on a desktop
system:
• To select an object, tap the mouse tip on the object once. This functions like a
mouse button click with the left mouse button.
• To "double-click" an object, tap twice on the object quickly.
• To generate a "right mouse button single-click", tap on the hotpad icon once and
then tap once on the display. To generate a "right mouse button double click",
tap on the hotpad icon once and then double tap on the display.
• To move, or "drag", an object on the screen, place the stylus tip directly over the
object, then as you hold the stylus tip against the screen, move the stylus.

Calibrating the stylus

Calibration of the stylus adjusts the cursor position on the screen relative to the
position of the stylus tip. You calibrate the stylus to adjust the distance error between
where the stylus actually touches the screen and where the system "thinks" the
stylus is touching. If the event you wish to invoke is not displayed under the stylus
tip when you use the stylus, you should calibrate the stylus.
Stylus calibration may be required due to the following situations:
• The stylus is being used for the first time.
• The previous user of the Stylistic 3500 pen tablet writes with the opposite hand or
at a different stylus angle.
• The system has been in use for some time and the stylus has not been recalibrated.
• The original system image has been restored.
Using the stylus
2
21