pro user BRILJANT Assembly Instruction And Safety Regulations page 6

MOUNTING OF THE BIKE CARRIER ON THE CAR
When mounting the bike carrier to the car, it is best that the car is parked
straight, the engine is turned off and the parking brake is activated. Make sure
that the tow ball is undamaged, clean and not greasy!
Put the bike carrier on the tow ball. Make
sure it is optically straight and unfold the
carrier by pushing out the "legs" until more
force is needed (position similar as on the
picture).
Next, press with the flat hand the locking
handle down. Push until this is not possible
anymore (this can cost some force!)
WARNING: Please don't hold the
locking handle with your complete
hand since this can cause some harm
on your hand!
Loosen the locking handle and the locking
system will make sure the bike carrier will
stay on the hitch ball.
Next, insert the safety pin in the in the
appropriate holes. The carrier is now ready
to carry your bikes!
Make sure that the carrier is the well
secured with the safety pin. The carrier
may not be used when the handle is
not secured with the safety pin.
34