Maintenance - pro user BRILJANT Assembly Instruction And Safety Regulations

After use, the carrier can be easily stored in the boot of your car or at home, in
the shed or garage. A practical carrier bag is supplied with the bike carrier, so
everything can be stored away neatly.
In case of defects or problems please contact your Pro-User supplier.

MAINTENANCE

Always store the bike carrier clean and dry after use. If necessary spray with the
water hose to remove mud and other filthy stuff.
Keep the tow ball of the car clean and free of grease.
Keep the connector of the bike carrier clean and free of grease.
Check the bike carrier regular if there is any damage. Damaged or worn parts
need to be replaced immediately. Use only original replacement parts.
The nuts and bolts of the bike carrier need to be checked regular, if necessary
tighten them again.
If there is a damage on the powder coating of the bike carrier this need to be
treated with paint immediately.
Rotating and moving parts need to be oiled regularly.
GUARANTEE
This product is covered by a 2 year warranty. Please note that our guarantee
covers reasonable use of the bike carrier, it does NOT cover any damage caused
by misuse. This also applies to a malfunction or failure of the bike carrier that
has been caused by poor or incorrect installation. To ensure the validity of the
guarantee please carry out maintenance in accordance with the maintenance
section. Warranty claim without proof of purchase is not possible. We reserve the
right to make a call out and/or repair charge for any work required to be
undertaken to rectify faults that are outside of the warranty i.e. incorrect or poor
fitting, misuse, accidental damage, etc.
40