Access Point Mode; Access Point Mode - D-Link DAP-1360L User Manual

Section 3 - Configuration
Enable Wireless: Check the box to enable the wireless function. If you
do not want to use wireless, uncheck the box to disable
all the wireless functions. You may also set up a specific
time range (schedule). Select a schedule from the drop-
down menu or click Add.New to create a new schedule.
Wireless Mode: Select Access.Point from the drop-down menu.
Wireless When you are browsing for available wireless networks,
Network Name:
this is the name that will appear in the list (unless
Visibility Status is set to Invisible, see below). This name
is also referred to as the SSID. For security purposes, it
is highly recommended to change from the default
network name.
802.11 Mode:
Select one of the following:
802.11b. Only - Select if you are only using 802.11b
wireless clients.
802.11g. Only - Select if you are only using 802.11g
wireless clients.
802.11n. Only - Select if you are only using 802.11n
wireless clients.
Mixed.802.11g.and.802.11b.- Select if you are using
a mix of 802.11g and 11b wireless clients.
Mixed.802.11n.and.802.11g - Select if you are using
a mix of 802.11n and 11g wireless clients.
Mixed.802.11n,.802.11g.and.802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
Wireless Indicates the channel setting for the DAP-1360L. The Channel can be changed to fit the channel setting for an existing wireless
Channel:
network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.
Enable Auto The Auto.Channel.Scan setting can be selected to allow the DAP-1360L to choose the channel with the least amount of interference.
Channel Scan:
D-Link DAP-1360L User Manual

Access Point Mode

35