Table of Contents
Advertisement
Section 3 - Configuration
Choose PPTP (Point-to-Point Tunneling Protocol) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
PPTP IP Address:
Enter the IP address (Static PPTP only).
PPTP Subnet Mask:
Enter the subnet mask.
PPTP Server IP Address:
Enter the Server IP Address provided by your
ISP.
Username:
Enter your PPTP username.
Password:
Enter your PPTP password and then retype
the password in the next box.
MTU Size:
You may need to change the MTU (Maximum
Transmission Unit) for optimal performance
with your specific ISP. The default MTU size
is 1400.
Attain
Select this option if you want the DAP-1360L
DNS Automarically:
get DNS server IP address automatically.
Set DNS Automatically:
Select this option if you want to manually
enter the DNS Server IP address(es). Fields to
enter the Primary and Secondary DNS server
IP addresses will appear after you select this
option.
DNS Servers:
Enter the Primary and Secondary DNS (Domain Name System) server IP address assigned by your ISP.
The default MAC address is set to the MAC address on the AP (Access Point). You can click the Clone.Your.PC's.MAC.Address
Clone MAC Address:
button to replace the AP's MAC address with the MAC address of your Ethernet card. It is not recommended that you change
the default MAC address unless required by your ISP.
D-Link DAP-1360L User Manual
PPTP
45
Advertisement
Table of Contents
