Wisp Repeater Mode - D-Link DAP-1360L User Manual

Section 2 - Installation
In the WISP Repeater Mode, the DAP-1360L wirelessly connects to a WISP (Wireless Internet Service Provider) AP. In this mode,
the DAP-1360L also acts as a router for both wireless and wired clients on your LAN. The WISP Repeater Mode provides NAT
(Network Address Translation) and a DHCP server to generate IP addresses for both wireless and wired clients. NAT and the
DHCP server allow many computers to share the same wireless Internet connection.
If you are a WISP subscriber and want to use your WISP account in your house, but the signals from the outdoor WISP AP are
not strong enough to reach all of the areas in the house, use the DAP-1360L to can extend the signals from the outdoor WISP
AP and provide access to wireless clients in your house. Using this mode, wireless as well as wired clients can connect to the
outdoor WISP AP through the DAP-1360L.
Internet
D-Link DAP-1360L User Manual

WISP Repeater Mode

Modem Router
Connecting.Wired.and.Wireless.PCs.to.the.Internet.Using.the.DAP-1360L
Computer
DAP-1360L
In WISP Repeater Mode
Computer
Computer
19