Operational Safety Guidelines; Impres Feature / Benefit Description - Motorola IMPRES 2 PMPN4350 User Manual

Operational Safety Guidelines

• This equipment is not suitable for outdoor use. Use only in dry
locations/conditions.
• Connect equipment only to an appropriately fused and wired supply
of the correct voltage (as specified on the product).
• Disconnect from line voltage by removing the main plug from the
outlet.
• The socket outlet to which this equipment is connected should be
close and easily accessible.
• Maximum ambient temperature around the charger must not exceed
40 °C (104 °F).
• Make sure the cord is located where it will not be stepped on, tripped
over, or subjected to water, damage, or stress.
• Output power from power supply unit must not exceed the ratings
stated on the product label located on the bottom of the charger.

IMPRES Feature / Benefit Description

The IMPRES energy solution is an advanced Tri-Chemistry energy
system developed by Motorola Solutions which encompasses
(a) IMPRES batteries, (b) the IMPRES Adaptive Charger and, (c) radio
hardware/software which provides the capability for IMPRES
compatible radios to communicate with IMPRES batteries.
The IMPRES Adaptive Charger, when used in conjunction with
Motorola Solutions IMPRES batteries, will:
1. Maximize battery life by significantly reducing heat during the trickle
and post-charge cycles.
2. Provide higher-rate IMPRES Lithium-Ion battery charging.
3. Eliminate the need to train personnel to "manage battery
maintenance tasks".
With this unique patented system approach, there is no need to track
and record IMPRES battery use, conduct manual calibration cycles,
or remove batteries from chargers following charging.
2