Herschel IR360 Installation & Operating Instructions

Ceiling-mounted infrared heaters

ELECTRICAL EQUIPMENT:

Waste electrical products should not be disposed of with household waste. Please recycle where

facilities exist.

IMPORTANT NOTICE TO PURCHASER:

Before utilizing the product, you should determine the suitability of the product for its intended use. HERSCHEL

INFRARED LTD expressly disclaims the implied warranties and conditions of merchantability and fitness for a

particular purpose. In no case shall HERSCHEL INFRARED LTD be liable under any legal theory, including but not

limited to contract or strict liability, for any direct, indirect special, incidental or consequential damages resulting

from product use.

The product complies with European Safety Standards for Industrial Use, RoHS and compatibility with

EMC EN 50336 and EN 62233. Not intended for Household or Similar use.

Original instructions covering IR360 1950W produced 042016 onwards.

HERSCHEL IR360

Ceiling-mounted Infrared Heaters

INSTALLATION & OPERATING INSTRUCTIONS

IP20

Table of Contents

Need help?

Do you have a question about the IR360 and is the answer not in the manual?

Page 1 INFRARED LTD expressly disclaims the implied warranties and conditions of merchantability and fitness for a particular purpose. In no case shall HERSCHEL INFRARED LTD be liable under any legal theory, including but not limited to contract or strict liability, for any direct, indirect special, incidental or consequential damages resulting from product use.
Page 2 7. This heater must only be used for the heating of people or buildings in a commercial environment. The IR360 is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, regardless of whether they have been given instruction or are under supervision.
Page 3 Where applicable, these regulations preclude the use of a 13A plug and socket for powering the Herschel IR360. For the final connection to the Herschel IR360, only the flexible cable and cable entry supplied with the unit must be used. The cable must connect to the supply in a suitable enclosure or cable outlet designed for that purpose.
Page 4 • The identification mark and model reference should be visible after installation. • The IR360 must not be attached so as to face or be close to any combustible material (eg, wood or PVC cladding, fascia or soffit). • The fixed wiring insulation coming into contact with parts with a temperature rise of greater than 50°C must be protected, for example, by sleeving having an appropriate temperature rating.