Herschel ASPECT XL2 Installation & Operating Instructions

Herschel ASPECT XL2 Installation & Operating Instructions

Wall-mounted infrared heaters

Advertisement

ELECTRICAL EQUIPMENT:
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist.
IMPORTANT NOTICE TO PURCHASER:
Before utilizing the product, you should determine the suitability of the product for its intended use. HERSCHEL
INFRARED LTD expressly disclaims the implied warranties and conditions of merchantability and fitness for a
particular purpose. In no case shall HERSCHEL INFRARED LTD be liable under any legal theory, including but not
limited to contract or strict liability, for any direct, indirect special, incidental or consequential damages resulting
from product use.
The product complies with European Safety Standards EN60335-2-30, RoHS and EMC EN 50336 and EN
62233. These cover the essential requirements of EEC Directives 2006/42/EC, 2011/65/EC and
2004/108/EC.
Original instructions covering Aspect XL2 1300W & XL3 1950W produced 042016 onwards.
HERSCHEL ASPECT XL2 -
HERSCHEL ASPECT XL3
Wall-mounted Infrared Heaters
INSTALLATION & OPERATING INSTRUCTIONS
IPX4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ASPECT XL2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Herschel ASPECT XL2

  • Page 1 INFRARED LTD expressly disclaims the implied warranties and conditions of merchantability and fitness for a particular purpose. In no case shall HERSCHEL INFRARED LTD be liable under any legal theory, including but not limited to contract or strict liability, for any direct, indirect special, incidental or consequential damages resulting from product use.
  • Page 2 DO NOT touch the heater when in use. The Herschel Aspect XL rises to very high temperatures in use. After the heater has been switched off the elements remain hot for a considerable time and the unit should CAUTION DO NOT not be touched within 30 minutes minimum.
  • Page 3 MOUNTING POSITION: The Herschel Aspect XL must be located in a position to allow proper and efficient use but one that ensures hot parts are not touched accidentally. The recommended installation height of the Aspect XL is 2.3m to 2.5m (90”- 98”) from the floor and under no circumstances is it to be installed at less than 1.8m from the floor.
  • Page 4 The canopy/roof/cover must be of a permanent nature, there must be a minimum clearance of 0.3m (12”) between the cover and any part of the Herschel XL and the cover must extend a minimum of 2m (79”) from the wall.

This manual is also suitable for:

Aspect xl3Ipx4

Table of Contents