Table of Contents
Advertisement
Quick Links
Models Covered by these Instructions:
Select Ceiling Tile Heater
HS350C
The product complies with European Safety Standards Low Voltage Directive 2014/35/EC, EMC
Directive 2014/30/EC, RoHS 2011/65/EC & Ecodesign requirements for local space heaters
2009/125/EC.
Original instructions covering Select Ceiling Tile Heater models produced from 062019 onwards.
HERSCHEL Select
Infrared Ceiling Tile Heater
INSTALLATION & OPERATING INSTRUCTIONS
Advertisement
Table of Contents
Related Manuals for Herschel Select Series
Summary of Contents for Herschel Select Series
- Page 1 HERSCHEL Select Infrared Ceiling Tile Heater INSTALLATION & OPERATING INSTRUCTIONS Models Covered by these Instructions: Select Ceiling Tile Heater HS350C The product complies with European Safety Standards Low Voltage Directive 2014/35/EC, EMC Directive 2014/30/EC, RoHS 2011/65/EC & Ecodesign requirements for local space heaters 2009/125/EC.
- Page 2 Switches and other controls cannot be touched by a person in the bath or shower. If in doubt, do not install. Herschel Infrared Ltd shall not be liable for any loss, damage or injury caused or resulting from inadequate fitting or incorrect placement of heaters close to water sources.
- Page 3 These heaters have no brackets and cannot be mounted on a ceiling surface. They can only be mounted in a ceiling grid tile space. For ceiling mounting panels on a ceiling surface, please use the Herschel Select XLS White panel range.
- Page 4 EcoDesign (Lot 20) requirements for fixed electric room heaters. Select Ceiling Tile heaters are not intended for free-standing (portable) use. Herschel is not responsible for any breach of the legislation where the Select Ceiling Heater is used without the appropriate Herschel controller.
- Page 5 Any further warranty or claims are excluded. The warranty covers the repair or replacement of the defective product only and Herschel shall have no liability for installation costs or consequential loses however incurred. The decision to repair or replace will rest solely with Herschel and any replacement will be as close as possible in specification to the failed heater.
- Page 6 Target efficiency post Lot 20 = 38% Actual efficiency post Lot 20 = 40% Herschel Select Ceiling Tile Heaters are “best in class” if used with Herschel Controls. Technical Details Nominal heat output ( = Rated Wattage of heater (see product label)
Need help?
Do you have a question about the Select Series and is the answer not in the manual?
Questions and answers