Table of Contents
Advertisement
Quick Links
TECHNICAL INFORMATION:
Rated Power:
Heating Element:
Reflector:
Dimensions:
Warm-up time:
Peak wavelength:
Weight:
Protection:
ELECTRICAL EQUIPMENT:
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
IMPORTANT NOTICE TO PURCHASER:
Before utilizing the product, you should determine the suitability of the product for its intended use. HERSCHEL INFRARED LTD
expressly disclaims the implied warranties and conditions of merchantability and fitness for a particular purpose. In no case shall
HERSCHEL INFRARED LTD be liable under any legal theory, including but not limited to contract or strict liability, for any direct,
indirect special, incidental or consequential damages resulting from product use.
The product complies with the essential requirements of European Safety Standards Low Voltage Directive 2014/35/EC,
RoHS 2011/65/EC & Ecodesign 2009/125/EC.
Original instructions covering Miami 2000 produced 072019 onwards.
HERSCHEL MIAMI 2000
Wall or Parasol-mounted Infrared Heaters
INSTALLATION & OPERATING INSTRUCTIONS
2000W at 220-240V
1 x 2kW premium low glare heating lamp
Mirror Aluminium (98% reflection preventing rearward heat loss)
460 x 190 x75mm
Wall, Ceiling, Parasol or Stand
2 seconds
0.8μm
2.2kg
2 Years (excludes lamp)
IP65
Advertisement
Table of Contents
Related Manuals for Herschel MIAMI 2000
Summary of Contents for Herschel MIAMI 2000
- Page 1 In no case shall HERSCHEL INFRARED LTD be liable under any legal theory, including but not limited to contract or strict liability, for any direct, indirect special, incidental or consequential damages resulting from product use.
- Page 2 Switches and other controls cannot be touched by a person in a bath or shower. If in doubt, do not install. Herschel Infrared Ltd shall not be liable for any loss, damage or injury caused or resulting from inadequate fitting or incorrect placement of heaters close to water sources.
- Page 3 MOUNTING POSITION: The Herschel MIAMI is a shortwave infrared heater characterised by a strong beam of heat suited for use in colder areas or areas that may be subject to light winds, whilst still maintaining heating effectiveness. It is ideal for mounting on parasols and for use on patios and in restaurant or pub gardens.
- Page 4 FREE-STANDING INSTALLATION: Diagram 4: Bracket – Stand installation Herschel’s patio heater stand (sold separately) is required for free-standing installation. Attach the brackets supplied with the heater first, then attach the brackets at the top of the stand to the heater bracket.
- Page 5 If the MIAMI is intended for use indoors to maintain a steady temperature, then a Herschel iQ controller must be used to control the unit. Herschel is not responsible for any breach of EcoDesign legislation where the MIAMI is used to maintain a steady...
- Page 6 Register your product here: https://www.herschel-infrared.com/customer-service/warranty-registration/ The Herschel MIAMI is guaranteed against failure due to faulty materials or workmanship for two years from date of purchase excluding the lamp. In the unlikely event of failure of the unit within this time, the unit must be returned to the supplier for repair or replacement. The guarantee is invalid if the correct installation instructions as given in this leaflet have not been adhered to.
Need help?
Do you have a question about the MIAMI 2000 and is the answer not in the manual?
Questions and answers
How many wing nuts should I have as I only got 2 . I cannot see how I'm supposed to fix the heater to the stand
The number of wing nuts included with the Herschel MIAMI 2000 heater for fixing it to the stand is not specified in the provided context.
This answer is automatically generated