Advertisement
Quick Links
Select Portable Infrared Panel Heater
Smart infrared heater
Setup and operating guide
Select Portable Infrared Panel Heater
HS500PR
HS500PR-EU
Notice to the purchaser
Before using this product, you should determine its suitability for its intended use. Herschel Infrared Ltd cannot
accept responsibility for damage, loss or injury caused by ingress of water or moisture, accidental damage,
mishandling, external impact, adjustment by unauthorised personnel or failure to follow the correct maintenance
and safety precautions as stated in this manual. Refer to Herschel Infrared Ltd's warranty policy for full details. See
https://www.herschel-infrared.co.uk
The product complies with European Safety Standards Low Voltage Directive 2014/35/EC, EMC Directive 2014/30/EC, RoHS 2011/65/EC & Ecodesign
requirements for local space heaters 2009/125/EC.
Original instructions covering Select Portable Infrared Panel Heaters produced from 12/2020 onwards
Select Portable Infrared Panel Heater
Models
500 Watts
220 – 240V 50Hz
IP20
2.4GHz wifi
Advertisement
Related Manuals for Herschel HS500PR
Summary of Contents for Herschel HS500PR
- Page 1 Refer to Herschel Infrared Ltd’s warranty policy for full details. See https://www.herschel-infrared.co.uk The product complies with European Safety Standards Low Voltage Directive 2014/35/EC, EMC Directive 2014/30/EC, RoHS 2011/65/EC &...
-
Page 2: Important Safety Precautions
Make sure that the heater itself, the plug and the cable are free of any visible signs of damage. If the cord is damaged the appliance must be sent for repair to an authorised Herschel Dealer. -
Page 3: Year Warranty
Herschel Infrared Ltd shall not be liable for any loss, damage or injury caused or resulting from inadequate fitting or incorrect placement of heaters close to water sources. SAVE THESE INSTRUCTIONS. - Page 4 If you have any questions our website also has many FAQs or you can call, message or online chat with us, we are always happy to help ensure that you get the most from your new Herschel heating system.
- Page 5 Select Portable Infrared Panel Heater Setup 1. Find the two feet supplied in the package. 2. Fit to the long lower side of the heater. The SMART-R power box at the back of the panel should be at the bottom edge of the heater.
-
Page 6: Operation
Select Portable Infrared Panel Heater Operation Heat to a fixed temperature with the built-in thermostat on the receiver The heater can be simply operated by switching it on at the wall and setting a fixed temperature on the SMART-R receiver. ECODESIGN Notice: When used in this simple operating mode, the Select Portable Infrared Panel Heater should only be used in well insulated spaces for occasional use and should not be left operating permanently switched on. - Page 7 Alternative Pairing mode offered by the SmartLife app. This is an option offered by the App if normal pairing mode fails. More detailed help is available online via the Help & Support section of your local Herschel Website. Operations available on the SmartLife App...
- Page 8 Smart mode Your Herschel Select Portable Infrared Panel Heater works most efficiently when it is set up to run against a program controlled by the SmartLife App. This program will always ensure your heater reaches the temperature you want at the time you want it, each day of the week.
- Page 9 The Select Portable Infrared Panel Heater can be painted to match décor using a suitable heat resistant paint. However, Herschel will not be responsible if the paint deteriorates or discolours. Any rights to return the heater for a refund within statutory periods will be voided where the heater has been painted.
Need help?
Do you have a question about the HS500PR and is the answer not in the manual?
Questions and answers