Table of Contents
Advertisement
Hansgrohe Internet Dealer www.NeedPlumbingSupplies.com 800-728-8890
1
2
3
4
Hansgrohe Faucets & More www.NeedPlumbingSupplies.com 800-728-8890
Installation
•
Remove the plastic plaster shields from
the valves and the spout tee.
Remove the white plastic handle snap
•
connectors. Turn the valve stems
clockwise to make sure that they are "off"
(1, 2).
Carlton only - install the handle
•
escutcheons by threading them onto the
mounting plates..
Push the hot handle over the hot stem.
•
While holding the cross steady with one
hand, turn the bell clockwise.(1) to secure
it to the valve. Repeat with the cold
handle (2)
•
Unscrew and remove the brass plug in
the spout tee with a 27 mm wrench (3)
Advertisement
Table of Contents
