Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hans Grohe Axor Citterio 39224 0 Series
Summary of Contents for Hans Grohe Axor Citterio 39224 0 Series
- Page 1 Installation Instructions / Warranty Vertical Spray Bidet Fitting Rough 1322X181 Citterio Citterio Starck Steel 39224xx0 39225xx0 10220xx0 35220800 38220xx0 Terrano Terrano Carlton Carlton 37224xx0 37225xx0 17224xx0 17225xx0 Phoenix Phoenix Montreux Montreux 17226xx0 17227xx0 16521xx0 16522xx0...
- Page 2 Citterio Citterio 39224xx0 39225xx0 Starck Steel 10220xx0 35220800 38220xx0...
- Page 3 Terrano Terrano 37224xx0 37225xx0 Carlton Carlton 17224xx0 17225xx0 Phoenix Phoenix 17226xx0 17227xx0...
-
Page 4: Technical Information
Montreux Montreux 16521xx0 16522xx0 Installation Considerations Technical Information Recommended water pressure 14.7 - 72.5 psi • For best results, Hansgrohe recommends that Max. water pressure 147 psi this unit be installed by a licensed, profes- Recommended hot water temp. 120° - 140° F* sional plumber. - Page 5 Rough-in Installation Instructions Install the transfer valve Install the y-connector and seal on the bottom of the transfer valve. Connect the hoses to the y-connector. Connect the elbow to the outlet on the transfer valve. The arrow on the elbow connector indicates the direction of the water flow.
- Page 6 Install the pop-up guide assembly Remove the nut, metal washer, and sealing washer from the pop-up guide assembly. Position the pop-up guide and sealing washer on the proper hole on the bidet. Install the metal washer and nut.
- Page 7 Install the pop-up drain Remove the plunger assembly. Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. Wrap the threads with Teflon tape and replace. Install the white, flexible sealing gasket to the flange. Place it in the sink outlet. Install the black mack gasket, white friction ring and retainer nut on the flange.
-
Page 8: Trim Kit Installation
Trim Kit Installation Install the valves: Starck only Remove the valve mounting nuts from the valves. Push the valves up into the mounting surface. Install the mounting plates. Tighten the tensioning screws. Install the valves: all other styles Remove the plaster shields, mounting plates, and stop rings from the valves. - Page 9 Install the transfer valve trim Install the sleeve on the transfer valve. Push the handle over the stem. Secure it using the screw. Line up the locator tab on the screw cover with the notch in the handle. Press down firmly. Install the handles Citterio/Carlton/Phoenix/Terrano Install the escutcheons on the mounting plates.
- Page 10 Starck Position the handle over the valve. Hold the lever steady with one hand. Secure the handle to the mounting plate by rotating the escutcheon clockwise with the other hand.. Montreux Position the handle over the valve. While holding the cross steady with one hand, use the other hand to turn the escutcheon clockwise to thread it onto the valve.
- Page 11 Replacement Parts - Rough Replacement Parts - Trim...
- Page 12 transfer valve 88632000 index cap set 97987xx0 connection hose 88631000 Terrano cross, cold 37291xx0 spray hose 88630000 37292xx0 pull rod 88634xx0 Terrano lever, cold 37296xx0 aerator 88633xx0 37295xx0 drain 94159xx0 screw cover set, cross 96481xx0 hinged connector 96100000 screw cover set, lever 97798xx0 plastic screw and filter 97592000...
- Page 13 Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning. Cleaning Materials for Faucets and Showers Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points when cleaning faucets and showers:...
-
Page 14: Limited Consumer Warranty
Limited Consumer Warranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products that are purchased by a consumer in the United States or Canada after March 1, 1996, and installed in either in the United States or in Canada. WHO IS COVERED BY THE WARRANTY This warranty extends to the original purchaser only. -
Page 15: Exclusions And Limitations
EXCLUSIONS AND LIMITATIONS REPAIR OR REPLACEMENT (OR, IN LIMITED CIRCUMSTANCES, REFUND OF THE PURCHASE PRICE) AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. HANSGROHE NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO CREATE FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH THIS PRODUCT. - Page 16 Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel. 770-360-9880 • Fax 770-360-9887 www.hansgrohe-usa.com...
Need help?
Do you have a question about the Axor Citterio 39224 0 Series and is the answer not in the manual?
Questions and answers