Table of Contents
Advertisement
RUGGEDCOM WIN7225
Installation Guide
Section 4.5
Mechanical Specifications
Weight (Base Station)
Weight (Mounting Bracket)
Ingress Protection
Chassis Material
Section 4.6
IDU-to-ODU Cable Specifications
The following outlines the technical specifications for the Indoor Unit (IDU) to Outdoor Unit (ODU) cable required
to assemble the Power-over-Ethernet (PoE) connector. For more information about assembling the PoE connector,
refer to
Section 2.8.3, "Assembling the PoE
The IDU-to-ODU cable is a special 4×2×24 AWG File Transfer Protocol (FTP) CAT-5e Outdoor Double Jacket Data
Cable that meets the requirements of the UL 1581 standard for vertical flame test (VW-1).
Description
Applications
General Construction
Design and Materials
Weight
Maximum Length
Conductor Material
Conductor Area
Wire Gage
Insulation Material
Insulation Outer Diameter
Color Code
Overall Foil Shield
Overall Shield Material
Overall Foil Design
Overall Drain-Wire Material
Mechanical Specifications
3.2 kg (7.1 lbs)
0.6 kg (1.2 lbs)
IP67
Aluminum
Connector".
Outdoor installations, fixed or portable installations, digital distribution frames in transmission stations,
outdoor installations in harsh environments.
Custom made cable designed specially for wireless systems, meeting the requirements of CAT-5e per
ANSI/TIA/EIA-568-B.2 and IEC 61156-5. The cable contains 4 twisted pairs, cabled, foil-tape shielded and
jacketed with two special black UV resistant, flame retardant PVC compounds for direct outdoor use in
harsh electrical environments. The diameter of the inner core complies with RJ45 connecting hardware
allowing direct connection to equipment without patch cords.
68.0 kg/km
80 m (262.5 ft)
Bare copper
0.52 mm (0.02 in)
24 AWG
Solid PO
1.07 mm (0.04 in)
Per TIA/EIA 568-B
Yes
Aluminum/Polyester Foil
100% Coverage
Tinned Copper
Chapter 4
Technical Specifications
31
Advertisement
Table of Contents
