ESP Fort ECSPCAM Quick Start Manual page 2

APP Pairing
1. Power up the device VIA the 5V Micro USB Cable
2. After 30 Seconds, a double chime will be heard
every 30 seconds.
The ClickSmart+ app will guide you through:
Entering the Wi-Fi Network and Password.
Using the Camera to scan a QR code.
Connecting the Device.
Resetting the Device
If the camera needs to be reset, connected to a new Wi-Fi network, or if it needs to be paired with a new master
account, remove the device from the app, prior to resetting the device.
9:41 AM 100%
Internal Camera
Screenshot
Playback
Home Smart Me
1. Using the reset key, long press the reset button until
3 chimes are heard.
2. The device should now be reset, after 30 seconds,
there should be a double chime heard.
Guidance
>Unit requires a minimum of 2 Mbps (upload/download)
>This unit only operates on 2.4GHz
>If the signal strength of your Wi-Fi router is weak: Change
router/camera relative position to receive better signal, Use Wi-Fi
repeater/extender to maximize the range of your Wi-Fi router.
>If the device is installed on a new network the unit will require
resetting
>If the camera needs to be added to a new account, unbind the
device from the first account prior to resetting the device.
For more product information please visit the ESP website
Elite Security Products
Redditch B98 8YN
9:41 AM 100% 9:41 AM
Smart Camera Settings
Device Name
Share Device
Device Infromation
Use Echo
Basic Function Settings
Motion Detection
FAQ & Feedback
Firmware Infromation
Remove Device
Speak Record
Alarm Photo album
9:41 AM
Home Smart
100%
Smart Camera
Low
100% 9:41 AM 100%
Add Manually Auto Scan
ClickSmart+ Window & Humidity &
Hub Door Sensor Temperature...
PIR Internal Camera 2G Switch
Module
2G Dimming Smart Double Smart Single
Module Socket Socket
Me
Telephone : 01527 51 51 50
Fax: 01527 51 51 43
Email : info@espuk.com
Web : www.espuk.com
E&OE - Errors and omissions excepted.G21
9:41 AM 100%
Cancel Net Pairing Mode
Reset the device first.
① Set up the device as per the
installation instructions
② Connect the device to the power
with the cable provided
③ After 30 seconds a double chime will be
heard ever 30 seconds.
Confirm Unit is bleeping