Overview; Installation - Carmanah SpeedCheck-15 Install Manual

2.0 Overview

The serial to Ethernet converter option for Carmanah's SPEEDCHECK-15/18 radar speed signs allows signs to
be configured remotely over an established network using Carmanah's SpeedCheck Manager software. When the
serial to Ethernet converter option is ordered with a SPEEDCHECK-15/18 sign, the converter comes pre-installed
in the sign. A standard Ethernet cable (not included) is required to connect the converter to your network and to a
PC during configuration.
The converter requires specific configuration to function on your network. See

3.0 Installation

Before starting this procedure, refer to the SPEEDCHECK-15/18 product user manual as needed at
support.carmanah.com.
The images in this guide may differ from your SpeedCheck radar speed sign. They are for illustrative
purposes only.
ENSURE DEVICE IS COMPLETELY POWERED OFF SO THERE IS NO DANGER OF
ELECTRICAL SHOCK OR RISK OF DAMAGING EQUIPMENT.
This section assumes your system has been fully assembled and installed already. If this is not the case, certain
steps may be skipped that are not necessary. Your system may look different than illustrated below.
SPEEDCHECK-15
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
SERIAL TO ETHERNET INSTALL GUIDE
Section 4
SPEEDCHECK-18
customersupport@carmanah.com
2.0 OVERVIEW
for more details.
5
| carmanah.com