Tripp Lite B072-008-1A Owner's Manual page 15

7. Firmware Upgrade
7.5 Current Firmware Verification
5. Uncheck the NetCommander CAT5 KVM Switch OSD box, and check the box next to
NetCommander CAT5 KVM Switch Manager. Click the F/W Version button at the bottom of the
utility to display the firmware version number. Check this against the firmware you obtained from
the Tripp Lite website to determine if an upgrade is needed.
6. Uncheck the NetCommander CAT5 KVM Switch Manager box, and check the box in the middle
of the utility next to each SIU for which you want to verify the firmware. Click the F/W Version
button at the bottom of the utility to display the firmware version number. Check this against the
firmware you obtained from the Tripp Lite website to determine if an upgrade is needed.
15-08-291-933350.indd 15
(continued)
( continued )
Figure 7.4: Manager Verification
Figure 7.5: SIU Verification
15
8/31/2015 9:59:12 AM