Installation Instructions; Preparation; Design Notice - Midea MPPD33H Owner's Manual & Installation Manual

recovery occurs. The recovery equipment shall be in good working order with a set of instructions
concerning the equipment that is at hand and shall be suitable for the recovery of flammable refrigerants.
In addition, a set of calibrated weighing scales shall be available and in good working order. Hoses shall
be complete with leak-free disconnect couplings and in good condition. Before using the recovery
machine, check that it is in satisfactory working order, has been properly maintained and that any
associated electrical components are sealed to prevent ignition in the event of a refrigerant release.
Consult manufacturer if in doubt. The recovered refrigerant shall be returned to the refrigerant supplier
in the correct recovery cylinder, and the relevant Waste Transfer Note arranged. Do not mix refrigerants
in recovery units and especially not in cylinders. If compressors or compressor oils are to be removed,
ensure that they have been evacuated to an acceptable level to make certain that flammable refrigerant
does not remain within the lubricant. The evacuation process shall be carried out prior to returning the
为增强通用性，已
compressor to the suppliers. Only electric heating to the compressor body shall be employed to
删除原说明书中的
accelerate this process. When oil is drained from a system, it shall be carried out safely.
机型外观轮廓图，
保留的轮廓图只用
于示例说明。以用

Installation Instructions

户实际购买产品为
准。

Preparation

NOTE:
All the illustrations in the manual are for explanation purpose only. Your machine may be slightly different.
The actual shape shall prevail. The unit can be controlled by the unit control panel alone or with the remote
controller. This manual does not include Remote Controller Operations, see the <<Remote Controller
Instruction>> packed with the unit for details.
front
upper air filter
(behind the grille)
upper air intake
drain outlet
air outlet
lower air filter
lower air intake
drain outlet
(only for pump
heating mode)
power cord buckle
power cord outlet
power plug socket
bottom tray
drain outlet

Design Notice

In order to ensure the optimal performance of our products, the design specifications of the unit
and remote control are subject to change without prior notice.
control panel
horizontal louver blade
(swing automatically)
upper air filter
(behind the grille)
handle
(both sides)
upper air intake
drain outlet
air outlet
Panel
lower air filter
lower air intake
drain outlet
(only for pump
heating mode)
power cord buckle
power cord outlet
Caster
power plug socket
bottom tray
drain outlet
vent control
rear
MODEL B
power cord buckle
power cord outlet
power plug socket
rear
MODEL A
upper air filter
upper air intake
drain outlet
air outlet
lower air filter
lower air intake
power cord buckle
power cord outlet
bottom tray
drain outlet
rear
MODEL C
upper air filter
(behind the grille)
upper air intake
drain outlet
air outlet
lower air filter
lower air intake
bottom tray
rear
drain outlet
MODEL A1
Page 11
 