Advertisement
Troubleshooting
To power cycle the touch screen:
1 Press and hold the
(power) button for several seconds
until the touch screen turns o .
2 Press and release the
(power) button again to turn on.
To perform a factory data reset:
1 On the touch screen's main screen, tap Settings, System
Info, then Factory data reset.
- OR -
If the touch screen has not yet been confi gured, tap About,
then Factory data reset.
- OR -
To reset without using the display screen:
a Dock the touch screen onto its charging station.
b Press and hold the volume up button while using a
straightened paper clip to press and release the reset
button.
Reset hole
c Keep holding down the volume up button until the icon
below appears on the screen, then release the button.
d A message appears, indicating that data is being erased.
control4.com | 888.400.4070
Copyright ©2015, Control4 Corporation. All rights reserved. Control4, the Control4 logo, the 4-ball logo, 4Store, 4Sight, Control My Home, Everyday Easy, and
Mockupancy are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. All other names and brands may be claimed as
the property of their respective owners. All specifi cations subject to change without notice.
Additional resources
The following resources are available for more support.
• Control4 Knowledgebase and forums
• Control4 Technical Support
• Control4 website:
www.control4.com
• Composer documentation available at
For the latest version of this document, open this URL or scan
the QR code on a device that can view PDFs.
MOST RECENT VERSION
ctrl4.co/tt-ig
Regulatory/Safety Information
To review regulatory information for your particular Control4
products, see the information located on the Control4 website at
ctrl4.co/reg
.
Patent information
Applicable patents are available at
Warranty
Visit
ctrl4.co/warranty
for details.
ctrl4.co/docs
.
ctrl4.co/patents
.
D
200-00389-D
2015-12-10 MS
Advertisement
