Table of Contents
Advertisement
After hanging the hood on the bracket, remove the grease filters, mark 2 holes
inside the hood for safety screws. After marking, remove the hood, drill two holes
3.
Use 2 pcs of wall plug and 2pcs of
Secure the body with security screws,
Use 2 pcs of wall plug and 2pcs of
re the body with security screws,
and insert 2 wall plugs and finally fix the safety screws with 2 screws (ST4x30mm).
ST4*30mm screws
to fix the hood
mm screws
to fix the hood
Place the plastic duct on the cooker hood outlet.
4. Place the plastic duct on the cooker hood.
ace the plastic duct on the cooker hood.
NOTE:
We recommend the ducting does not exceed 2.5 metres in length to ensure
maximum efficiency.
Please keep this instruction manual for future reference
12
Instruction manual ZEL900 / ZEL900GM
3
Chimney installation
Chimney installation
The lower chimney bracket is used to fix the upper decorative chimney and lower
The lower chimney bracket is used to fix the upper decorative chimney and lower decorative
decorative chimney.Use 2pcs 4x8mm screws to attach lower chimney and lower
chimney.
chimney bracket together. Put the lower chimney on the cooker hood and mark the
Use 2pcs 4x8mm screws to attach lower chimney and lower chimney bracket together. Put
the lower chimney on the cooker hood and mark the location of lower chimney bracket fixing
location of lower chimney bracket fixing holes on the wall.
holes on the wall.
Noted: Do not fasten screws too much, make sure upper decorative chimney can be
Note: Do not fasten screws too much, make sure upper decorative chimney can be
telescopically adjusted after assembled.
telescopically adjusted once assembled.
Put the chimney on the cooker hood. Fix the lower chimney bracket on the wall by
Put the chimney on the cooker hood. Fix the lower chimney bracket on the wall by 2 screws
2 screws (4mm x 30mm).
(4mm x 30mm).
Then pulling out the upper chimney upwards to the target height. Adjust to reach
the height required.
Fix the upper chimney on the upper chimney bracket by 2 screws (4x8mm). Then fix
the upper chimney bracket on the wall. Before fixing the bracket on the wall, you
can decide the upper chimney bracket fixing holes for installation.
Then pulling out the upper chimney upwards to the target height. Adjust to reach the height required.
Finally, fix the lower chimney to the hood using 2 screws (4x8mm).
Fix the upper chimney on the upper chimney bracket by 2
screws (4x8mm). Then fix the upper chimney bracket on the wall. Before
fixing the bracket on the wall, you can decide the upper chimney bracket fixing holes for
installation.
Use image from original manual here
3
Upper
chimeny
bracket
Upper chimney (Inner)
Lower Chimney bracket
Lower chimney (Outer)
5. Finally, fix the lower chimney to the hood using 2 screws (4x8mm).
Please keep this instruction manual for future reference
Instruction manual ZEL900 / ZEL900GM
13
Advertisement
Table of Contents
