Table of Contents
Advertisement
Standard Unit
ALT124
£936.85
ALT84
£838.05
ALT224
£1,012.85
ALT153
£526.45
ALT423
£625.25
ALT623
£716.45
ALT822
£572.05
ALT2202
£625.25
ALT4202
£701.25
ALT6202
£792.45
ALT6201
£663.25
ALT8201
£708.85
With Built in Calibration
ALT124-I
£1,088.85
ALT84-I
£990.05
ALT224-I
£1,164.85
ALT153-I
£678.45
ALT423-I
£777.25
ALT623-I
£868.45
ALT822-I
£724.05
ALT2202-I
£777.25
ALT4202-I
£853.25
ALT6202-I
£944.45
ALT6201-I
£815.25
ALT8201-I
£860.85
Factory Verified and with Built in
Calibration
ALT124-V
£1,157.25
ALT84-V
£1,058.45
ALT224-V
£1,233.25
ALT153-V
£746.85
ALT423-V
£845.65
ALT623-V
£936.85
ALT822-V
£792.45
ALT2202-V
£845.65
ALT4202-V
£921.65
ALT6202-V
£1,012.85
ALT6201-V
£883.65
ALT8201-V
£929.25
Advertisement
Table of Contents
Related Manuals for Sartorius ACCULAB ATILON ATL-84
Summary of Contents for Sartorius ACCULAB ATILON ATL-84
- Page 1 Factory Verified and with Built in Standard Unit With Built in Calibration Calibration ALT124 £936.85 ALT124-I £1,088.85 ALT124-V £1,157.25 ALT84 £838.05 ALT84-I £990.05 ALT84-V £1,058.45 ALT224 £1,012.85 ALT224-I £1,164.85 ALT224-V £1,233.25 ALT153 £526.45 ALT153-I £678.45 ALT153-V £746.85 ALT423 £625.25 ALT423-I £777.25 ALT423-V £845.65...
- Page 2 ATILON Analytical and precision balances The new Premium series of the ACCULAB brand proves that high-end technology and low-end price do not have to be a contradiction. All models are optionally available with a built-in, motorized calibration weight and as versions verified at the factory for use in legal metrology.
- Page 3 Models and technical specifications: Analytical balances Model Readability Capacity Int. Verification Design Calibration (mg) ATL-84 ATL-84-I ATL-84-V Ex works ATL-124 ATL-124-I ATL-124-V Ex works ATL-224 ATL-224-I ATL-224-V Ex works Präzisionswaagen Model Readability Capacity Int. Verification Design Calibration ATL-153 0.001 0.001 ATL-153-I 0.001 ATL-153-V...
- Page 4 Operating Instructions ACCULAB ATILON Electronic Analytical and Precision Balances 98648-015-55...
-
Page 5: Table Of Contents
Contents 3 Warnings and Safety Precautions 43 ISO/GLP-compliant Printout/Record 4 Getting Started 45 Data Interface 5 Installation 46 Troubleshooting Guide 10 Operation 47 Care and Maintenance 10 Display and Operating Elements 11 Basic Weighing Function 48 Recycling 13 Calibration/Adjustment 49 Overview 16 Configuration (Operating Menu) 49 Specifications 16 Functions of the Keys during Configuration... -
Page 6: Warnings And Safety Precautions
Warnings and Safety Precautions Safety – Connect only Acculab accessories, as these are optimally § To prevent damage to the equipment, please read these designed for use with your Atilon balance. The operator shall operating instructions carefully before using the balance. be solely responsible for installation and testing of any modifi- cations to Acculab equipment, including connection of cables Do not use this equipment in hazardous areas. -
Page 7: Getting Started
Getting Started Storage and Shipping Conditions Installation – Do not expose the balance to extreme temperatures, Choose a location that is not subject to the following moisture, shocks, blows or vibration. negative influences: – Heat (heater or direct sunlight) Unpacking the Equipment –... -
Page 8: Installation
Installation Setting Up the Balance Instruments with sliding-door draft shield: § Place components inside the chamber in the following order: – Draft shield base plate – Drip/breeze ring – Pan support – Weighing pan Instruments with a round glass draft ring: §... - Page 9 Connecting the Balance to AC Power/Safety Precautions Use only original Acculab AC adapters. For use within – Europe: part no. 6971412 – U.S./Canada: part no. 6971413 § Connect the angle plug to the balance § Connect the AC adapter to the wall outlet (mains) AC Adapter with Country-specific Power Cord Some models come with separate country-specific power cords for the AC adapter.
- Page 10 Connecting Electronic Peripheral Devices § Make sure to unplug the balance from AC power before you connect or disconnect a peripheral device (printer or computer) to or from the interface port. Warmup Time To ensure accurate results, the balance must warm up before operation as follows: –...
- Page 11 Below-Balance Weighing A port for a below-balance weighing hanger is located on the bottom of the balance. $ Below-balance weighing is not permitted in legal metrology. § Open cover plate on the bottom of the balance. Important: set the balance on its side to access the cover plate. DO NOT turn the balance upside-down.
- Page 12 Leveling the Balance Purpose: – To compensate for unevenness at the place of installation Always level the balance again any time after it has been moved to a different location. Only the 2 front feet are adjusted to level the balance. §...
-
Page 13: Operation
Operation Overview of Display Elements Pos. Designation Pos. Designation Weight unit Busy symbol: command is being processed (for example, Menu level indicator “Wait for stability icon); after you turn on the power, Symbol: “GLP printing mode active” A will be displayed until you press a key Symbol: “Printing mode active”... -
Page 14: Basic Weighing Function
Basic Weighing Function Features Using Verified Balances as Legal Measuring – Taring the balance Instruments in the EU*: – Printing weights The type-approval certificate for verification applies only to non-automatic weighing instruments. For automatic Preparation operation with or without auxiliary measuring devices, you §... - Page 15 Example Simple Weighing Step Key (or instruction) Display/Printout Balance in standby mode 10:32:30 1. Switch on the balance (ON/OFF) 0.0 g Self-test is performed, followed by automatic initial tare function. 2. Place container on weighing pan 11.5 g (in this example: 11,5 g). 3.
-
Page 16: Calibration/Adjustment
Calibration and Adjustment Purpose To block calibration/adjustment: Calibration is the determination of any difference between – Select Cal.-Adj.-blocked in the menu the measured value displayed and the true weight (mass) – Close the menu access switch on the back of the balance of a sample. - Page 17 Internal Calibration/Adjustment (Only on ATL…-I und ATL…-V models) Set the following parameters: SETUP - Waage - CAL.Just. - Cal.Int. (menu code 1.1. 9. 4) The built-in motorized calibration weight is applied and removed automatically for internal calibration. Step Key (or instruction) Display 1.
- Page 18 External Calibration Parameters (changes in factory settings): SETUP - Waage - CAL.Just. - Cal.Ext. (menu code 1.1. 9. 1) The required calibration weight is configured at the factory (see “Specifications”) Step Key (or instruction) Display 1. Tare the balance (TARE) 0.0 g 2.
-
Page 19: Configuration (Operating Menu)
Configuration (Operating Menu) You can configure the balance; i.e., adapt it to individual requirements. Functions of the Keys during Configuration Symbol Function (MENU)* Scroll through menu items Press and hold > (ENTER) One menu level lower ↵ (ENTER) Confirm menu item (CLEAR) Save settings and exit menu from any position Press and hold... - Page 20 Menu Navigation Example: Setting the Language Step Key (or instruction) Display 1. Open the menu: (MENU)* (hold) Applic. In weighing mode: first menu item is shown 2. Scroll upward within the Repeatedly: (MENU)* Input menu level; after the last menu code, the first languag.
-
Page 21: Parameter Settings: Menu
Parameter Settings: Menu Level 1 Level 2 Level 3 Menu code Ambient Ambient conditions 1. 1. 1. Setup Bal.Scal. Balance parameters app.fil. Application filter 1. 1. 2. Stab.Rng. Stability range 1. 1. 3. Taring Taring 1. 1. 5 AutoZer. Auto zero 1. -
Page 22: Parameter Settings: Overview
Parameter Settings: Overview ο = Factory setting √ = User-defined setting Level 1 Level 2 Level 3 Level 4 Menu code V.Stable Very stable 1. 1. 1. 1 Setup Bal.Scal. Ambient ο Stable Balance Ambient 1. 1. 1. 2 parameters conditions 1. - Page 23 Level 1 Level 2 Level 3 Level 4 Menu code 1. 5. 1. 3 Setup Interf. Baudrate ο 1200 Interface 1. 5. 1. 4 1. 5. 1. 5 2400 1. 5. 1. 6 4800 1. 5. 1. 7 9600 1. 5. 1. 8 19200 ο...
- Page 24 Level 1 Level 2 Level 3 Level 4 Menu code 1. 6. 5. 1 Setup Prnt.Out Prt.Init. ο All All parameters Printing Printing appli- 1. 6. 5. 2 cation parameters MainPar. Main parameters 1. 6. 5. 2 Format Line 16 Char. 16 characters (w/o ID) 1.
- Page 25 Level 1 Level 2 Level 3 Level 4 Menu code 2. 1. Applic. Weigh ο All Applic. 2. 2. 2. 1 Unit Disp.Dig. programs Toggle units Display 2. 2. 2. 2 Minus 1 accuracy ο Disp.Acc. Display accuracy 2. 3. 1. 1 Counting Resolut.
-
Page 26: Input: Id Number, Date And Time
Input: ID number, Date and Time Level 1 Level 2 Level 3 Menu Code ID input for ISO/GLP compliant data record; 3. 1. Input ID No. Input 7 characters max. Permitted characters: 0 to 9; A to Z; dash/hyphen; space Menu item for setting the date 3. - Page 27 Example: ID No., Date and Time Step Key (or instruction) Display 1. Open the menu:In weighing mode; (MENU)* hold APPLIC. first menu item is displayed 2. Select “Input” (MENU)* Input 3. Select input for ID no. twice (ENTER) ID NO. 4.
-
Page 28: Application Programs
Device Information Level 1 Level 2 Level 3 Example Menu code Show software version 4. 1. InFormation version rel.36.03 Show serial number 4. 2. Ser. No. 10801234 To toggle focus between upper and lower display sections, press (MENU)* Show model designation 4. -
Page 29: Counting
Counting Changing the Reference Sample Quantity Display symbol: Activate function: Press the (MENU)* key Purpose Select the desired reference sample quantity (1 to 100): With the Counting program you can determine the number In increments of 1: Press the (MENU)* key briefly of parts that each have approximately equal weight. - Page 30 Example : Counting parts of equal weight Parameter: Applic. - Count. (menu code 2. 3.) Step Key (or instruction) Display/Data output 1. Place empty container 22.6 on the balance 2. Tare the balance (TARE) 3. Add reference sample quantity to container (in this example: 20 pcs) 4.
-
Page 31: Weighing In Percent
Weighing in Percent Changing the Reference Percentage Display symbol: Activate function: Press the (MENU)* key Purpose Select the desired reference (1 to 100): This application program allows you to obtain weight read- In increments of 1: Press the (MENU)* key briefly outs in percent which are in proportion to a reference In increments of 10: Press and hold the (MENU)* key. - Page 32 Example: Determining residual weight in percent Parameter settings: Applic. Percent (menu code 2. 4.) Reference percentage: Ref 100% Step Key (or instruction) Display/Data output 1. Tare the balance (TARE) 0.0 g 2. Place sample equal to 100% on the balance (in this example: 111.6 g) 3.
-
Page 33: Calculation
Calculation Display symbol: C Setting the Factor or Divisor Activate function: Purpose Press the (MENU)* key With this application program you Select a number of up to 7 digits and, if needed, can calculate weight value using a multiplier or divisor. This one decimal point (0.000001 to 9999999): can be used, for example, to determine the weight per unit In increments of 1: Press the (MENU)* key briefly... - Page 34 Example: Calculating the weight per unit area of paper: An A4 sheet of paper is used in this example, with surface dimensions of 0.210 m + 0.297 m = 0.06237 m . To determine the weight per unit area, the total weight is divided by the surface. Parameter settings: Applic.
-
Page 35: Animal Weighing/Averaging
Animal Weighing/Averaging Display symbol: V Changing the Number of Subweighing Operations Purpose Activate function: Use this program to determine the weights of unstable Press the (MENU)* key samples (e.g., live animals) or to determine weights under Select the desired number of unstable ambient conditions. - Page 36 Example: Determining animal weight with automatic start and 20 subweighing operations (measurements) Parameter settings: Applic. AnimalW. (menu code 2. 7.) Step Key (or instruction) Display/Data output 1. Place animal weighing bowl on the balance 22.6 g 2. Tare the balance (TARE) 0.0 g 3.
-
Page 37: Net-Total Formulation
Net-total Formulation Display symbol: R Features – Weigh up to 99 components from “0” to a defined total Purpose component weight. With this application program you can weigh in individual components either by their individual weight or by the total –... - Page 38 Example: Counting parts into a container Parameter settings: Applic.-Net-Tot (menu code 2. 5.) Step Key (or instruction) Display/Data output 1. Place empty container on the balance. 65.0 g 2. Tare the balance (TARE) 0.0 g 3. Add first component + 120.5 g 4.
-
Page 39: Totalizing
Totalizing Display symbol: R Features – Totalizing memory for up to 99 values Purpose With this application program you can add values from suc- – Store component weights (printout shows cessive, mutually independent weight values to a total that with automatic printout “Comp xx”... - Page 40 Example: Totalizing weight values Parameter settings: Applic. Total Comp.Prt On (Code 2. 6. 1. 2) Step Key (or instruction) Display/Data output 1. Tare the balance (TARE) 0.0 g 2. Place sample balance + 380.0 g (in this example: 380 g) 3.
-
Page 41: Density Determination
Density Determination Display symbol: W Printout for Density Determination : Weight in air 20.0 g Purpose : Weight in liquid 15.0 g This application program lets you determine the density of : Result: density 4.0 o solid substances using the buoyancy method. You can have of the sample results displayed with one decimal place, or no decimal places: see “Configuration”... - Page 42 Example: Determining the density of a solid sample. Parameter settings: Applic.-Density-Dec.Plcs-1 Dec. Pl (menu code 2. 9. 1. 2) Step Key (or instruction) Display/Data output 1. Attach sample holder to suspension wire 2. Tare the balance (TARE) 0.0 g 3. Start application program (ENTER) 4.
-
Page 43: Mass Unit Conversion
Mass Unit Conversion Purpose Features With this application program you can change the weight – Set the basic unit and display accuracy in the Setup menu: value displayed from the basic weight unit to any of 4 see “Configuration.” application weight units (see table on next page). –... - Page 44 Example: Change display from the basic unit (in this example, grams [g]) to pounds [lb] and then to Troy ounces [ozt]. Set the following parameters: Applic. Unit (Code 2. 2.) Step Key (or instruction) Display Preparation: 1 Begin selection of an application weight unit (MENU)* None 2.
- Page 45 The following weight units are available in your Atilon balance (in legal metrology, only units permitted by national law are available): Menu item Unit Conversion factor Display symbol 1) UserDef. Grams 1,00000000000 2) Grams (factory setting) Grams 1.00000000000 3) Kilogr. Kilograms 0.00100000000 4) Carats...
-
Page 46: Iso/Glp-Compliant Printout/Record
ISO/GLP-compliant Printout/Record Features – Line format for printout: include data ID codes You can have device information, ID texts and date and (22 characters; factory setting): time printed before (GLP header) and after (GLP footer) Setup Prnt.Out Format 22 Char. the values of a weighing series. - Page 47 The ISO/GLP-compliant printout can contain the following lines: Dotted line -------------------- Date/time (beginning of measurement) 17-Aug-2006 10:15 Balance manufacturer ACCULAB Model Mod. ATL-8201 Balance serial number Ser. no. 10105355 Software version Ver. no. 00-36-01 2690 923 Dotted line -------------------- Measurement series no. L ID Counting: reference sample quantity nRef...
-
Page 48: Data Interface
Internal ground (GND) Pin 9: Not connected Pin 10: Not connected Pin 11: + 12 V (power supply for Sartorius printer) Pin 12: Reset _ Out *) For remote switch Pin 13: + 5 V Pin 14: Internal ground (GND) -
Page 49: Troubleshooting Guide
Troubleshooting Guide Error codes are shown on the main display for approx. 2 seconds. The program then returns automatically to the previous mode. Display Cause Solution No segments appear No AC power is available Check the AC power supply on the display The power supply is not Plug in the power supply plugged in... -
Page 50: Care And Maintenance
Care and Maintenance Repairs § Repair work must be performed by trained service technicians. Any attempt by untrained persons to perform repairs may result in considerable hazards for the user. If the instrument requires repairs, please contact your Acculab dealer. Cleaning §... -
Page 51: Recycling
Recycling Safety Inspection Information and Instructions on Disposal and Repairs If there is any indication that safe Packaging that is no longer required must be disposed of at operation of the balance is no longer warranted: the local waste disposal facility. The packaging is made of §... -
Page 52: Overview
Overview Specifications Built-in motorized All ATL...-I and ATL...-V models calibration weight AC power source/power AC adapter 230 V or 115 25 V, requirements, voltage, frequency +15% to – 20%, 48 – 60 Hz Power consumption maximum 16; typical 8 (STNG6) Approx. - Page 53 Specifications for Individual Models Model ATL-224, ATL-224-I ATL-124, ATL-224-I Weighing capacity Readability 0.0001 0.0001 Tare range (subtractive) Repeatability <± g 0.0001 0.0001 (std. deviation) Linearity <± g 0.0002 0.0002 Response time (average) –6 Sensitivity drift within +10 to +30°C 2 · 10 <±/K Adaptation By selection of 1 of 4 optimized filter levels;...
- Page 54 Specifications for Individual Models Model ATL-6202, ATL-4202, ATL-2202, ATL-822, ATL-6202-I ATL-4202-I ATL-2202-I ATL-822-I Weighing capacity 6200 4200 2200 Readability 0.01 0.01 0.01 0.01 Tare range (subtractive) 6200 4200 2200 Repeatability < ± g 0.01 0.01 0.01 0.01 (std. deviation) Linearity <...
-
Page 55: Accessories
Accessories External calibration weights: For model Accuracy class Weight in grams Order no. ATL-224 YCW5228-00 ATL-124 YCW5128-00 ATL-623 YCW5528-00 ATL-4202 2000 YCW6228-00 ATL-6202 5000 YCW6528-00 ATL-153 YCW5138-00 ATL-423 YCW5238-00 ATL-2202 2000 YCW6238-00 ATL-822 YCW5548-00 ATL-8201, ATL-6201 5000 YCW6548-00 ± 25 mg 5000 YSS653-00 Product... - Page 56 C Marking The balance complies with the following EC Directives and On request, Sartorius will provide information on the European Standards: minimum operating specifications (in accordance with Council Directive 89/336/EEC the Standards listed above for defined immunity to “Electromagnetic compatibility (EMC)”...
- Page 59 Copyright by Acculab. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior written permission of Acculab. The status of the information, specifications and illustrations in this manual is indicated by the date given below.
Need help?
Do you have a question about the ACCULAB ATILON ATL-84 and is the answer not in the manual?
Questions and answers