Table of Contents
Advertisement
If you ran 800 meters, adjust displayed
distance to read 800m.
7
8
Manually Calibrate the SDM Pod
After calibration, the SDM pod automatically
calculates an offset value. The default value is 1.000.
Change the offset value to make small adjustments to
the calibration. If the SDM pod is slightly under measuring
a known distance, increase the offset value. Different shoe
models may affect the pod calibration. Adjust the offset value
accordingly if you notice differences between shoes.
Follow steps
EXIT
5
2
3 SECS
3
Scroll to
RUN mode.
Press several
times to scroll
to OFFSET.
9
through
to fine-tune the offset value.
4
Press to change value.
EXAMPLES
1.000 = factory setting
0.990 = 99% of factory setting
1.010 = 101% of factory setting
The offset value is 1.000.
You run 400m. The SDM pod
returns a reading of 380m (5%
under). The offset value should
be adjusted to 1.050 (5% above).
NOTE: Write down and save your
offset value. It will come in handy
if you let friends or family borrow
the Triax CV10 and they
change the calibration setting.
Advertisement
Table of Contents
