Configuring Network Connectivity Settings - H3C S6820 Configuration Examples

Hide thumbs Also See for S6820:

Command reference manual (39 pages)

Installation manual (70 pages)

Table Of Contents

Table of Contents

# Add all ports used for BFD MAD to the VLAN, including Twenty-FiveGigE 1/0/1,

Twenty-FiveGigE 2/0/1, Twenty-FiveGigE 3/0/1, and Twenty-FiveGigE 4/0/1.

[IRF-vlan1000] port twenty-fivegige 1/0/1 twenty-fivegige 2/0/1 twenty-fivegige

3/0/1 twenty-fivegige 4/0/1

[IRF-vlan3] quit

# Create VLAN-interface 1000, and configure a MAD IP address for each member device on

the interface.

[IRF] interface vlan-interface 1000

[IRF-Vlan-interface1000] mad bfd enable

[IRF-Vlan-interface1000] mad ip address 192.168.2.1 24 member 1

[IRF-Vlan-interface1000] mad ip address 192.168.2.2 24 member 2

[IRF-Vlan-interface1000] mad ip address 192.168.2.3 24 member 3

[IRF-Vlan-interface1000] mad ip address 192.168.2.4 24 member 4

[IRF-Vlan-interface1000] quit

# Disable the spanning tree feature on the ports in the BFD MAD VLAN.

[IRF] interface twenty-fivegige 1/0/1

[IRF-Twenty-FiveGigE1/0/1] undo stp enable

[IRF-Twenty-FiveGigE1/0/1] quit

[IRF] interface twenty-fivegige 2/0/1

[IRF-Twenty-FiveGigE2/0/1] undo stp enable

[IRF-Twenty-FiveGigE2/0/1] quit

[IRF] interface twenty-fivegige 3/0/1

[IRF-Twenty-FiveGigE3/0/1] undo stp enable

[IRF-Twenty-FiveGigE3/0/1] quit

[IRF] interface twenty-fivegige 4/0/1

[IRF-Twenty-FiveGigE4/0/1] undo stp enable

[IRF-Twenty-FiveGigE4/0/1] quit

Configure the intermediate device:

# Create VLAN 1000 (BFD MAD VLAN).

<Sysname> system-view

[Sysname] vlan 1000

# Add all ports used for BFD MAD to the VLAN, including Twenty-FiveGigE 1/0/1,

Twenty-FiveGigE 1/0/2, Twenty-FiveGigE 1/0/3, and Twenty-FiveGigE 1/0/4.

[Sysname-vlan1000] port twenty-fivegige 1/0/1 twenty-fivegige 1/0/2 twenty-fivegige

1/0/3 twenty-fivegige 1/0/4

[Sysname-vlan3] quit