Example: Setting Up A Four-Chassis Bfd Mad-Enabled Irf Fabric; Network Configuration - H3C S6820 Configuration Examples

interface HundredGigE3/3/0/1
port link-mode bridge
port link-type trunk
port trunk permit vlan 1 10
port link-aggregation group 2
#
interface HundredGigE4/2/0/1
port link-mode bridge
port link-type trunk
port trunk permit vlan 1 10
port link-aggregation group 2
#
interface HundredGigE4/3/0/1
port link-mode bridge
port link-type trunk
port trunk permit vlan 1 10
port link-aggregation group 2
Example: Setting up a four-chassis BFD
MAD-enabled IRF fabric

Network configuration

As shown in
of the enterprise network (see
Use BFD MAD to detect IRF split.
The IRF fabric provides gateway services for servers and runs OSPF.
Figure 8, set up a four-chassis IRF fabric to replace the switches at the distribution layer
Figure 7).
20