Preparation Before Imaging - Vatech PaX-500 User Manual

1. Preparation before Imaging

Make sure to check the following before starting imaging.
VATECH Co., Ltd.
V2.0.0
PaX-500
26
● Start your PC after turning on the power of the equipment.
● Check whether the equipment is turned on.
● Do not perform any operation of PC while the product is in operation.
● Check whether there is any problem in operation of PC.
When the equipment is already turned on, select the Imaging Mode through
imaging program and then follow the instruction of the program.
This configuration may differ depending on specification of your product. Check
the production information of appendix for details of manual.
Release