Changing The Battery; Lift Out Battery - Taylor-Dunn TT-416 Operator's Manual

MT-416-00

CHANGING THE BATTERY

Lift Out Battery

Removing the battery will require an overhead hoist or forklift attachment not included with the
vehicle. Refer to the manufacturer of the hoist or attachment for proper operation.
WARNING
Before removing the battery:
1) Refer to battery warnings at the start of this chapter.
2) Park the vehicle on a level surface.
3) Position the vehicle as close as possible to where the battery will be stored.
4) Place the Directional Control switch in the center OFF position.
5) Confirm park brake is applied.
6) Make sure the Start switch is in the OFF position.
7) Block the wheels.
8. Unplug the battery connector.
9. Attach the hook from the hoist or forklift attachment to the lifting eye on the battery box.
10. Lift the battery until it is clear of the frame.
11. Place the battery on the ground or battery storage platform.
12. If the battery is to be moved away from the vehicle, then it should first be lowered as close
as practical to the ground before transporting.
TT-416 Stand Up Tow Tractor Page 45