Trigger Or Clear Alarm Output Manually - HIKVISION DS-96064NI-I16 User Manual

You can set one PTZ type only for the linkage action each time.

Trigger or Clear Alarm Output Manually

Purpose:
Sensor alarm can be triggered or cleared manually. When the Manually Clear is selected for the
dwell time of an alarm output, the alarm can be cleared only by clicking Clear button.
Go to System> Event>Normal Event>Alarm Output.
Select the alarm output you want to trigger or clear.
Click Trigger/Clear to trigger or clear an alarm output.
Network Video Recorder User Manual
119
PTZ Linkage