Fuse Replacement; Vehicle; Recycle; Blade Finish - Blizzard POWER PLOW 8100PP Owner's Manual

FUSE REPLACEMENT

The vehicle control harness contains two
automotive-style fuses. The snowplow control and
park/turn power are both covered by a 10A fuse. The
control fuse is "hot" when the vehicle ignition switch is
ON and the electrical connections to the snowplow are
completed.
See the Harness Diagram at the end of this manual for
fuse ratings and locations.
The hydraulic unit harness system contains four
automotive-style mini-fuses. The 2-solenoid coil
harness (to port B on the hydraulic unit module)
contains two 5A mini-fuses. The 7-solenoid coil
harness (to port C on the hydraulic unit module)
contains two 4A mini-fuses.
If a problem should occur and fuse replacement is
necessary, the replacement fuse must be of the same
type and amperage rating as the original. Installing a
fuse with a higher rating can damage the system and
could start a fi re.

VEHICLE

The snowplow operating vehicle shall be maintained
according to manufacturer's recommendations.
Tire pressure shall be maintained according to
manufacturer's recommendation.

RECYCLE

When your snowplow has performed its useful life, the
majority of its components can be recycled as steel or
aluminum. Hydraulic fl uid shall be disposed according
to local regulations. Balance of parts made of plastic
shall be disposed of in a customary manner.

BLADE FINISH

If the powder-coated fi nish is nicked or scratched,
repair the blade surface with BLIZZARD
black paint (available in aerosol or quart cans from
your BLIZZARD outlet). Clean and repaint parts as
necessary.
Lit. No. 40691, Rev. 05
MAINTENANCE

EMERGENCY PARTS/TOOLS

We suggest that you keep a BLIZZARD emergency
parts kit (PN 41143) in your vehicle. These kits contain
BLIZZARD hydraulic fl uid, dielectric grease, common
hoses, fi ttings, switches, pins, clips, and a motor relay.
Also keep the following items in your vehicle for
emergency use:
• 10" adjustable wrench
• Pliers (locking, adjustable, etc.)
• Medium screwdriver
• 11/16" open-end wrench
• 3/4" open-end wrench
• 4A, 5A, and 10A automotive-style mini-fuses
• Miscellaneous fasteners
Always use BLIZZARD designed and tested
replacement parts.

TROUBLESHOOTING

If you have followed all of the guidelines in
the Maintenance section of this manual and
cannot resolve issues with the operation of your
BLIZZARD snowplow, contact one of our authorized
outlets for repair information, or visit us online at
www.blizzardplows.com. Our website has a complete
listing of authorized outlets in your area as well as a
complete library of Parts Lists, Mechanic's Guides,
and service information to assist the qualifi ed
mechanic with repair.
Blizzard does not recommend repairs by other
than our factory-trained outlets. Failure to use an
authorized outlet could aff ect the warranty coverage
on your snowplow.
® white or
36 May 1, 2021