BRAYER BR1140 Instruction Manual page 4

6 en
• do not repair the unit by yourself. do not
disassemble the unit by yourself, if any malfunction
is detected, and after it was dropped, unplug the unit
and apply to the service center.
• Transport the coffee maker in the original package.
• keep the unit out of reach of children and disabled
• persons.
COFFee MAKeR IS InTenDeD FOR HOUSeHOLD
USe OnLY, DO nOT USe THe KeTTLe FOR
InDUSTRIAL OR LABORATORY PURPOSeS.
BeFORe USInG THe COFFee MAKeR
After unit transportation or storage at low
temperature, it is necessary to keep it for at least
three hours at room temperature.
• Unpack the coffee maker and remove all the
packaging materials.
• keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• examine the coffee maker for damages, in case of
damage do not plug it into the mains.
• Make sure that the specifications of power supply
voltage specified on the lower panel of the unit or
the base (4) correspond to the specifications of your
mains.
• Wipe the outer surface of the unit body (1) with a
clean, slightly damp cloth to remove dust.
• Place the base (4) on a solid steady flat and non-slip
non-metal surface away from heat sources as far as
possible from the edge of the surface.
• do not place and do not use the coffee maker in
closed space, for example, in the cupboard or in
closed structures — this can lead to its breakage,
cause harm to the user or damage to his/her
property.
• Remove the lid (2), wash the lid (2) with neutral
detergent, rinse and dry. Wipe the outer surface of
the unit body (1) with a slightly damp cloth and then
wipe it dry. do not use abrasives or coarse scourers
for this.
• Before connecting the coffee maker, make sure that
there are no moisture drops on the unit body (1), the
power cord and the power plug.
• Make sure that the coffee maker is switched off and
the power switch (5) is set to the position «0».
• To fill the coffee maker with water, take it off the base
(4) and remove the lid (2).
• Fill the coffee maker with water up to the maximal
level mark.
• Set the coffee maker filled with water on the base (4).
• Insert the power plug into the mains socket.
• Set the power switch (5) to the "I" position to switch
the coffee maker on; the light indicator in the power
switch will light up.
ATTenTIOn!
To avoid burns by hot steam, do not bend over the
coffee maker.
• When water starts boiling, switch the coffee maker
off by setting the power switch (5) to the position
«0», the light indicator will go out. Pour out water and
repeat the water boiling procedure several times.
• Hot water resulting from the first boilings is not
recommended to consume, you may use it for
domestic needs.
• The coffee maker is ready for usage.
USInG THe COFFee MAKeR
• ATTenTIOn!
- To avoid damage of the coffee maker do not
switch it in without water. If you accidentally
switched the coffee maker on without water,
unplug the coffee maker and let it cool down.
Do not try to cool the unit down by filling it with
water. When the coffee maker cools down, fill it
with water and it will be ready to use.
- To avoid scaling use filtered water.
- depending on your taste you can add the
necessary amount of ground coffee, sugar and
spices to the coffee maker.
en
• Place the base (4) on a solid and steady flat surface
away from heat sources as far as possible from the
edge of the surface.
• Make sure that the power switch (5) is always easily
accessible and it is not blocked by foreign objects.
• Make sure that the coffee maker is switched off and
the power switch (5) is set to the position «0».
• To fill the coffee maker with water, take it off the base
(4) and remove the lid (2).
• Fill the coffee maker with water up to the maximal
level mark, add the required amount of ground
coffee, sugar and spices.
• notes: — use ground coffee intended for brewing in
the coffee maker.
• Set the coffee maker on the base (4).
• Insert the power plug into the mains socket.
• Set the power switch (5) to the "I" position to switch
the coffee maker on; the light indicator in the power
switch will light up.
• during coffee making it is recommended to stir the
coffee once or twice.
• ATTenTIOn!
- do not stir the coffee in the coffee maker with a
metal spoon or other metal objects, if the coffee
maker is connected to the mains socket without
grounding contact.
7