Endress+Hauser Prosonic M FMU40 Brief Operating Instructions page 25

Prosonic M FOUNDATION Fieldbus
The "Basic setup" (00) function group lists all the functions which are required for a standard
measurement task to commission the Prosonic M. When you have completed your input for a
function, the next function appears automatically. In this way, you are guided through the
complete calibration.
5.5 Measuring point settings
5.5.1 Function "tank properties" (002)
ENDRESS + HAUSER
– +
E
In this function, select one of the following options:
Selection:
• dome ceiling (→ A)
• horizontal cyl. (→ B)
• bypass (→ C)
• stilling well (ultrasonic guide pipe) (→ D)
• no ceiling (→ E)
• sphere (→ F)
• flat ceiling (→ G)
A
E
Endress+Hauser
⇒
B
ENDRESS+HAUSER
Prosonic M
F
Commissioning
C D
G
L00-FMU4xxxx-14-00-06-de-001
25