Advertisement
•
Adjust cables to proper tension from any of the locations shown below.
Note: All cables with threaded adjustable ends must have at least 1/2" of the threads threaded in to its
counterpart. It is very important that the 1/2" Jam Nut be wrench tightened to the counterpart to en-
sure that the threaded adjustable end of the cable does not back out of its counterpart.
•
Note: If the top plate raises off of the second plate in the weight stack, then the cable tension is too tight. You will
need to take some of the tension out to lower the Top plate flush with the second plate.
www.batcafitness.com
Cable Adjustments
17
2
1
S-10 Owner's Manual
Advertisement
