HYT TC-780MU1 Manual page 8

﹡TK (Top Key)
Programmable function key.
﹡Channel Selector Knob
Rotate the knob to select a desired channel.
﹡Radio On-Off/Volume Control Knob
Rotate the knob clockwise to turn the radio on, and rotate the knob fully counter-clockwise until a click is heard to turn the
radio off.
Turn the knob clockwise to increase the volume, or counter-clockwise to decrease the volume.
﹡LED Indicator
Status
Wired Clone
Source radio: Turn the radio on while
holding down PTT and SK2.
Target radio: Rotate the Radio On-Off
knob clockwise to turn the radio on.
Source radio: turn on the target radio
and connect the cloning cable. Then
press the PTT on the source radio to
initiate cloning.
Target radio
Power On
Low Battery Alert
Transmitting
Receiving
Scanning
LED Indications and Tones
The orange LED flashes twice.
1. LED solidly glows red when
cloning is in progress;
2. LED goes out when cloning is
completed;
3. LED flashes red when cloning
fails.
1. LED solidly glows green when
cloning is in progress;
2. LED goes out when cloning is
completed.
The green LED flashes once.
Three beeps are heard.
LED glows red.
LED glows green when
presents.
Red LED flashes once every 1
second. The green LED flashes when
carrier
7