HYT TC-780MU1 Manual page 28

Note: Only one frequency can be added for the radio each time if more than one frequency is added for the system. You
can add another frequency via manual scan or turning the radio off and back on. Same operations for deleting
frequencies. This feature asks for corresponding function support of the system.
Other Features
1. Dynamic Calling Party Number Display
If the calling party and called party are in the same fleet, the called party will display the number of the calling party
dynamically.
Note: This feature asks for system support, that is to say, the system must transmit broadcast messages on control
channel, notifying all radios to send their own ID for message maintenance when the PTT key is pressed.
2. Time-Out Timer (TOT)
Set the amount of time the radio user can continuously transmit on a channel via the TC-780M programming software. The
timer counts down upon transmission. When the timer expires, the radio will stop transmitting automatically.
Note: The TOT feature is only applicable for the calling party. The called party only displays the actual communication
time.
3. Fleet Call Inhibit
Calls (individual call/group call) are prohibited on some fleets by selecting hidden at the corresponding fleets in the TC-780M
programming software. This feature only supports CPS dial.
4. VoteNow
After the VoteNow feature is enabled via the programming software, the radio will compare the signal strength of the
broadcast BS with that of the currently locked BS. This feature asks for system support.
LCD Display
27